Fuji Xerox apeosport-iv C5570 Administrator's Manual page 555

7
With holding the tabs, return the cartridge to
the original position, and then gently push
the cartridge in until it clicks into place.
8
Repeat steps 3 to 7 for the cartridge at the back of the unit.
9
Return the unit to the original position.
10
Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine
remains paused.
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.
Stapler Faults
14
553