Notes And Restrictions On The Security Features - Fuji Xerox apeosport-iv C5570 Administrator's Manual

15 Appendix
Web Application feature (ApeosPort Series Models Only)
Job Flow Settings for High Compression Format
When [MRC High Compression] is set to [On] under [File Format] for the Scan features,
select one of the alternatives for each setting item:
Important • If settings other than the above are used, you can register a Job Flow sheet on the machine,
Addresses Registered on Job Flows
If you specify a speed dial or an address registered on the Address Book when creating
a job flow on the machine, any subsequent change of the number or address on the
Address Book is not reflected on the job flow created. To transmit to the changed
address, you must directly correct the address registered on the job flow.
15

Notes and Restrictions on the Security Features

Encrypted Communication
Encrypting HTTP communication enables you to encrypt communication data for IPP
printing (SSL encrypted communication). The data is encrypted only on the network,
but send data itself is not encrypted.
644
If an interference pattern is created, change the settings as follows:
- Resolution: [200 dpi] or [300 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-F] or [TIFF-J]
The following conditions and restrictions are applied when you print files stored in a
remote server.
- [Output Destination] can be specified, but the staple and hole punch cannot be
specified.
- The [Pages per Side] feature can be specified only when you print PDF files.
- When [Port Settings] is set to [NetWare] or [SMB], set the transport protocol to
[TCP/IP].
- HTTP or HTTPS can be used for the communications between the machine and
a remote server.
- Printable file formats are [TIFF], [PDF], and [XPS].
- Print data is spooled to the hard disk of the machine, and then printed as a job.
Therefore, the print data is recognized as a job while the data is being spooled to
the hard disk.
- The Secure Print feature cannot be used.
- Printing is available even when [Auto Print] is set to [On] under [Machine Clock /
Timers].
- "Web Applications - Print" is displayed on the [Job Status] screen.
- The <Online> indicator is unlit while the print data is being spooled to the hard disk.
- Color Scanning: [Auto Detect], [Color], or [Grayscale]
- Resolution: [200 dpi] or [300 dpi]
- Reduce / Enlarge: [100%]
- File Format (without thumbnail specification): [PDF], [DocuWorks], or [XPS]
- File Format (with thumbnail specification): [DocuWorks] or [XPS]
but an error occurs when the machine executes the Job Flow and the Job Flow cannot be
carried out.