Hard Clip Area - Fuji Xerox apeosport-iv C5570 Administrator's Manual

Hide thumbs Also See for apeosport-iv C5570:

Table of Contents

Hard Clip Area

In the HP-GL mode, the plottable area is determined in line with the paper size, apart

from the printable area. This area is called the "hard clip area", and determines the

maximum range of pen movement. Accordingly, images cannot be drawn outside the

boundary of the hard clip area. This machine allows you to select a hard clip area from

the following:

900-915 (Pen

Set the process for when pens' lines intersect for 16 pens (No. 00 to 15).

No. 00 denotes Item No. 900.

(No. 0-No.15)

[0] (Default)

• [None] is suitable for drafts because it takes shortest processing

• If a symbol is set by symbol command, the link process is not

950-965 (Pen

Sets the color of the 16 pens (No. 00 to 15). You can set the color from 0

to 250% in 1% increments. The default value is [0] for No. 0, and [100] for

(No. 0-No.15)

the others. No. 00 denotes Item No. 950.

• The relationship between the pen attributes and fonts are as follows:

Pen attributes

Line end shape

Link process

executed. The symbol command is an HP-GL/2 command for

specifying a symbol.

: 0 to 250 (color)

Roman, Sans-Serif

Table of Contents