Transfer Protocol - Fuji Xerox apeosport-iv C5570 Administrator's Manual

Given Name
Enter a recipient given name with up to 32 single-byte characters.
For information about how to enter characters, refer to "Entering Text" (P.31).
Custom Item 1
The attribute name set as [Custom Item 1 attribute name] is shown as the item name.
You can input any information as an auxiliary item. Up to 20 single-byte characters are
allowed. This item is suitable for information represented by a shorter character string, such
as telephone number and employee number.
For more information on the attribute name, refer to "Attribute Name of Custom Items 1, 2, and 3"
(P.188).
Custom Item 2
The attribute name set as [Custom Item 2 attribute name] is shown as the item name.
You can input any information as an auxiliary item. Up to 40 single-byte characters can be
used. This item is suitable for information represented by a longer character string, such as
company name and department name.
For more information on the attribute name, refer to "Attribute Name of Custom Items 1, 2, and 3"
(P.188).
Custom Item 3
The attribute name set as [Custom Item 3 attribute name] is shown as the item name.
You can input any information as an auxiliary item. Up to 60 single-byte characters can be
used. This item is suitable for information represented by a much longer character string,
such as company division name and company address.
For more information on the attribute name, refer to "Attribute Name of Custom Items 1, 2, and 3"
(P.188).
S/MIME Certificate (ApeosPort Series Models Only)
Allows you to link an S/MIME certificate. The S/MIME certificate must be registered in
advance.
To link a certificate, select [Attach/Change Certificate] and select a certificate in a screen
displayed. To remove a link, select [Remove Certificate].
Important • If a certificate linked to an S/MIME certificate in the Address Book is deleted by some
reasons such as hard disk initialization and the deletion of the certificate, the certificate
linked to the S/MIME certificate will be invalid. Even if you re-register the S/MIME certificate,
you have to manually link it again.
Note • If many certificates are registered on the machine, it may take a long time to link a certificate.
For more information on the certificate, refer to "Encryption and Digital Signature Settings" (P.347).

Transfer Protocol

Set the transfer protocol. You can select either [FTP] or [SMB].
Server Name/IP address
Enter a name or an IP address of a forwarding destination server.
Shared Name (SMB Only)
Enter the shared name set for the SMB folder.
Important • If the "/" mark is used at the top of a shared name, a job flow cannot read the shared name
correctly. Do not use the "/" mark at the top of a shared name.
Setup
5
247