Original Size Defaults; Reduce/Enlarge Presets; Custom Colors - Fuji Xerox apeosport-iv C5570 Administrator's Manual

5 Tools
Page Number Position - Top Left, - Top Center, - Top Right, - Bottom Left, - Bottom Center, and -
Bottom Right
You can adjust the position to print a page number finely.
Bates Stamp - Top Left, - Top Center, - Top Right, - Bottom Left, - Bottom Center, and - Bottom
Right
You can adjust the position to print a bates stamp finely.
Quantity Display
You can select how you want to display the counter in the Copy service.
Select from [Quantity], [Quantity and Memory], and [Quantity and Original Count].
Maximum Number of Sets
Set the maximum number of allowed sets to copy between 1 and 999. Users will not be able
to specify a larger number of sets to copy than the value set here.

Original Size Defaults

Set the original sizes displayed in [Original Size] in the [Layout Adjustment] screen.
You can assign original sizes to the buttons other than [Auto Detect].
If you frequently make copies of non-standard size document, setting non-standard
5
size as the default can avoid extra operations required during the use of the machine.
A/B Series Size
You can select from A and B series sizes.
Inch Size
You can select from inch series sizes.
Others
You can select from other sizes.
Custom Size
You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.

Reduce/Enlarge Presets

Set the magnifications displayed as [Preset %] which are displayed when [Proportional
%] is selected under [Reduce/Enlarge] in the [Copy] screen.
You can assign any magnification to the R/E Preset buttons other than [100%] and
[Auto %].

Custom Colors

Set the custom colors used for [Single Color] and [Dual Color] in the [Output Color]
screen.
You can assign custom colors with yellow (0 to 100%), magenta (0 to 100%), and cyan
(0 to 100%) to each custom color buttons 1 to 6.
Note
172
• Adjust so that the total of yellow, magenta, and cyan does not exceed 240%.