Loading Paper In Tray 5 - Fuji Xerox apeosport-iv C5570 Administrator's Manual

2 Paper and Other Media
2
Load and align the edge of the paper against
the left edge of the tray, with the side to be
copied or printed on facing down.
Important • Do not load paper above the maximum fill
3
Push the tray in gently until it stops.

Loading Paper in Tray 5

When printing or copying on a size or type of paper that cannot be set in Trays 1 to 4,
use Tray 5. The following describes the procedures to load paper in Tray 5. For
printings, specify the instructions using the [Paper/Output] tab in the print driver. Also
specify the type of paper to be loaded.
2
Important • To prevent paper jams and erroneous detection of paper loaded in the tray by the machine,
Note
1
Open Tray 5.
Note
2
Load paper with the side to be copied or
printed on facing down, inserting the paper
until its edge lightly touches against the
paper feed entrance.
Important • Do not load mixed paper types into the
3
Adjust the paper guides to align the edges of
the paper loaded.
4
Instruct a copy or print job.
46
line ("MAX" in the right figure). It may
cause paper jams or machine
malfunction.
do not take out paper of a package until the tray runs out of paper.
• Carefully fan the paper before loading it in a tray. Otherwise, the paper may stick together,
resulting in paper jams, or multiple sheets being fed to the machine simultaneously.
• If necessary, pull out the extension tray.
The extension tray can be extended in
two stages. Pull out the extension tray
gently.
tray.
• Do not load paper above the maximum fill
line. It may cause paper jams or machine
malfunction.
• Depending on the type of the
heavyweight paper, paper may not be fed
to the machine or image quality may deteriorate.