Fuji Xerox apeosport-iv C5570 Administrator's Manual page 551

4
After you take out the staple cartridge, check
inside of the finisher for any remaining
staples.
5
Pull up the metal part of the staple cartridge
as shown in the illustration.
6
Remove the jammed staples (1), and then
return the metal part pulled up in step 5 to
the original position (2).
CAUTION
Be careful in removing jammed staples.
7
Push the staple cartridge into the machine
until it clicks into place.
8
Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine
remains paused.
Stapler Faults
14
549