Pcl Settings List - Fuji Xerox apeosport-iv C5570 Administrator's Manual

PCL Settings List

The following table describes the parameters that can be set with the mode menu.
Parameter Item No.
Paper tray 201
Auto size 202
Bypass size 203
Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF B1)
Important • When Trays 1 to 4, Tray 6 is selected, the paper size is determined
by the size of paper loaded in the tray, and thus [Paper Size] cannot
be set.
Note • When [Auto] is selected and paper of the same size in the same
orientation in multiple trays is loaded, paper will be fed in the order of
Tray 1 Tray 2
size is loaded in multiple trays but in different orientations, feeding of
the paper loaded in the landscape orientation is prioritized.
Sets the default paper size. Only available when [Paper Tray] is set to
[Auto]. Only cut sheet can be set.
[3] : A3
[4] (Default*) : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 × 14"
[22] : 8.5 × 13"
[23] (Default*) : 8.5 × 11"
[24] : 11 × 17"
[25] : Custom Size
[30] : 8K
Important • When Trays 1 to 4, Tray 6 is selected, [Paper Size] cannot be set.
The paper size loaded in the specified tray is displayed.
Note • When Trays 1 to 4, Tray 6 is selected, the paper size is determined
by the size of paper loaded in the tray, and thus [Paper Size] cannot
be set.
• Depending on the combination of [Original Size] and [Paper Size], [?]
may be displayed for the magnification. In this case, the document is
printed at a scale of 100%.
Sets the default paper size. Only available when [Paper Tray] is set to
[Auto]. Only cut sheet can be set.
[3] : A3
[4] (Default*) : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 × 14"
[22] : 8.5 × 13"
[23] (Default*) : 8.5 × 11"
[24] : 11 × 17"
[25] : Custom Size
Value
Tray 3 Tray 4 Tray 6. If paper of the same
PCL Emulation
15
599