Authentication - Fuji Xerox apeosport-iv C5570 Administrator's Manual

For more information about [Passcode Entry from Control Panel], refer to "Passcode Policy" (P.267).
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
3
Enter a new passcode (4 to 12 digits) using
the keyboard displayed, and then select
[Save].
Note • If no passcode is set, leave the text boxes
4
Select [Retype Passcode], enter the same
passcode, and then select [Save].
5
Select [Save].
6
A confirmation window appears. Select [Yes] to confirm your entry.

Authentication

In [Authentication], you can set the following items.
The following shows the reference section for each setting.
Login Type ............................................................................................................................... 263
Access Control ......................................................................................................................... 263
Create/View User Accounts ..................................................................................................... 265
Reset User Accounts ................................................................................................................ 265
Create Authorization Groups ................................................................................................... 265
User Details Setup.................................................................................................................... 266
Maximum Login Attempts by System Administrator.............................................................. 267
Passcode Policy ........................................................................................................................ 267
Charge/Private Print Settings ................................................................................................... 267
Login Type
Allows you to select a type of authentication.
No Login Required
Does not use the Authentication feature.
Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note • When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login]
Login to Remote Accounts (ApeosPort Series Models Only)
Authenticates users based on the user information registered on a remote authentication
server.
Note • The machine enters the Login mode, and [Login] is displayed at the lower left of the
Access Control
Allows you to restrict access to the machine or each service. Once the access control
is enabled, user authentication is required to use the machine or the services.
blank and select [Save].
is displayed at the lower left of the [Services Home] screen.
[Services Home] screen.
Authentication/Security Settings
5
263