Notes And Restrictions When Connecting With Internet Service Provider - Fuji Xerox apeosport-iv C5570 Administrator's Manual

Hide thumbs Also See for apeosport-iv C5570:
Table of Contents

Advertisement

Notes and Restrictions when Connecting with Internet Service Provider

This section describes notes and restrictions to observe when using features that
transmit e-mails or Internet faxes using an Internet service provider (ISP).
The features related to e-mail are as follows:
E-mail
E-mail Notification Service
Print E-mail
Internet Fax
Notes and Restrictions on Accessing ISP
Observe the following notes and restrictions when connecting the machine to ISP:
Dial-up connection is not supported. Continuous connection is required.
Connect the machine in an environment using IP masquerade. Assigning a global IP
address to the machine is not supported.
Be sure to assign an exclusive e-mail account to the machine for POP reception.
Sharing an e-mail account with other users may cause troubles.
Be sure to set size limitation for sending e-mail. Although the applicable e-mail size
may vary depending on the ISP used, we recommend that you set a small value.
Although continuous connection other than ADSL or cable connection is also
supported, the reception of image data significantly burdens the machine.
SMTP reception is not supported. This machine supports only POP reception.
When installing the machine in an environment that is operating a mail transfer agent
(MTA) in a private segment, set the machine to adapt to the operation system being
used.
For information about supported ISPs, contact our Customer Support Center.
When received via POP, the fax cannot be sent using the Fax Gateway feature. This
is because POP receiving does not forward an Internet fax document received by e-
mail to the fax machine.
Feature Specifications
Details of the features related to e-mail are as follows:
Transmission specifications
Supported protocol
Port number
Authentication for transmission
SMTP authentication
POP before SMTP
Waiting time for POP authentication : cannot be changed
Encryption communication (SSL)
Receiving specifications
Supported protocol
POP3 port number
Authentication method for POP3
Notes and Restrictions
: SMTP
: 25 (default)
: Plain and LOGIN
: Plain and APOP
: not supported
: POP3
: 110 (default)
: Plain only (APOP is not supported)
15
639

Advertisement

Table of Contents
loading

Table of Contents