Fuji Xerox apeosport-iv C5570 Administrator's Manual page 452

14 Problem Solving
Error Code
C P F S M O
016-210
016-211
016-212
016-213
016-214
016-215
016-216
016-217
016-219
016-220
016-221
016-222
016-223
016-224
016-225
016-226
016-227
016-228
016-229
016-230
016-231
016-232
016-234
016-235
14
016-240
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
450
Category
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
Cause and Remedy
An error occurred in the software.
screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer
Support Center.
An error occurred in the document feeder.
screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer
Support Center.
An error occurred in the software
screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer
Support Center.
The Image Extension Kit may be damaged, or may not be
installed correctly.
screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer
Support Center.
An error occurred during initialization of the high
compression board.
screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer
Support Center.
An error occurred in the Authentication feature of the
machine.
screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer
Support Center.
An error occurred in the document feeder.
screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer
Support Center.