13
Return the cover to the original position.
Note
• Push the cover until it clicks into place.
14
Rotate the release lever clockwise to lock
the cover.
15
Close the front cover.
Note
• If the front cover is not completely closed, a message will appear and the machine remain
Replacing Staple Cartridge (for Finisher-A1)
When the optional Finisher-A1 is installed and the staple cartridge needs to be
replaced, a message appears on the touch screen. When this message appears, load
a new staple case into the staple cartridge.
Important • The use of staple cartridges not recommended by Fuji Xerox may degrade quality and
Note
• To order a staple cartridge, contact our Customer Support Center.
1
Make sure that the machine is not operating,
and open the finisher front cover.
2
Take the staple cartridge out of the finisher.
paused.
performance. Use only staple cartridges recommended by Fuji Xerox.
Replacing Consumables
69
3