Step 3 Registering Smart Card Information - Fuji Xerox apeosport-iv C5570 Administrator's Manual

7
Select [Smart Card Logout Timing], and then select [Change Settings].
8
Select the authentication logout method, and then select [Save].
9
Select [Close].

Step 3 Registering Smart Card Information

The system administrator can register smart cards using CentreWare Internet
Services.
Note • The information used for authentication can also be set from CentreWare Internet Services.
1
Start CentreWare Internet Services.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.276).
2
Click the [Properties] tab.
3
Click [ ] on the left of [Securities], and then click [Smart Card Settings].
4
Select the smart card to use.
1) Click [Edit] next to the smart card.
2) Select the [Enabled] check box, and then set the priority.
3) Click [Apply].
Note • You can select multiple smart cards, but the card detection time increases in proportion to
5
Register the smart card that you selected the [Enabled] check box for.
1) Click [Edit] next to the smart card.
2) Configure required settings.
3) Click [Apply].
6
To encrypt the smart card information, click the [Encrypt] button in [Encryption
Settings].
Important • Once you encrypt the smart card information, you cannot view or edit the information later.
You can backup the smart card setting using [Cloning]. For more information, refer to the help of
CentreWare Internet Services.
For more information, refer to the help of CentreWare Internet Services.
the number of cards selected. We recommend that you select the required cards only.
Also, when you click the [Decrypt] button, the information is reset to the default. You should
backup the smart card information before encryption.
Configuration for IC Card Reader (Optional)
13
393