15 Appendix
1
On the [Services Home] screen, select [Fax/
Internet Fax].
2
Select [On-hook (Manual Send/Receive)] on
the [More Options] screen.
3
Specify the call destination.
Note
4
When the call is connected, lift the receiver
and start speaking.
5
After the call is finished, place the receiver back in the cradle.
Important • Make sure that the receiver is placed properly in the cradle. Otherwise, the line remains
15
654
The call destination can be specified using the numeric keypad, address numbers,
or one-touch buttons. The Address Book cannot be used.
The call destination can be specified also
with the keyboard displayed on the screen.
• To disconnect the call, select [Line Cut].
• If your telephone line is set to touch-tone,
[Tone (:)] does not appear.
• If you want to send tones (or to use the
touch-tone services) while using a pulse
line, select [Tone (:)].
• Some touch-tone services may not be
available even if you set your telephone to send tones.
"busy".