Fuji Xerox apeosport-iv C5570 Administrator's Manual page 613

Parameter Item No.
180 degree 168
rotation
Emulation target 169
printer
Pen attributes 800-815 (Pen
width)
(No. 0-No.15)
850-865 (Line
end shape)
(No. 0-No.15)
Specify whether or not to rotate landscape documents in 180 degrees.
[0] (Default) : Off
[3] : On
Select the machine to emulate.
[0] (Default) : HP750
[1]1 : FX4036
Set the width (thickness of the line) of the 16 pens (No. 00 to 15). You can
set the width from 0.0 to 25.2 mm in 0.1 mm increments. No. 00 denotes
Item No. 800.
[0] - [255] (Default: 3) : 0 to 25.5 mm
Note • If the image is reduced by concern with the relationship between
[Document size] and [Paper size] settings, the pen width is reduced
accordingly to 0.1 mm at the smallest.
• The width of the line gets thick symmetrically with respect to the
center of the line.
• If the width is set to 0.0 mm, nothing is plotted.
Set the line end shape of the 16 pens (No. 00 to 15). No. 00 denotes Item
No. 850.
[0] (Default) : Cut
[1] : Round
[2] : Rectangular
[Cut]
: specified coordinate
[Round]
: specified coordinate
[Rectangular]
: specified coordinate
HP-GL2 Emulation
Value
15
611