Transfer Protocol - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

is suitable for information represented by a shorter character string, such as telephone
number and employee number.
Reference
For more information on the item name, refer to "Attribute Name of Custom Items 1, 2, and 3" (P.196).
Custom Item 2
The attribute name set as [Attribute Name of Custom Item 2] is shown as the item name.
By factory default, the item name is set to "Office". You can input any information as an
auxiliary item. Up to 40 single-byte characters can be used. This item is suitable for
information represented by a longer character string, such as company name and
department name.
Reference
For more information on the item name, refer to "Attribute Name of Custom Items 1, 2, and 3" (P.196).
Custom Item 3
The attribute name set as [Attribute Name of Custom Item 3] is shown as the item name.
By factory default, the item name is set to "Department". You can input any information as
an auxiliary item. Up to 60 single-byte characters can be used. This item is suitable for
information represented by a much longer character string, such as company division name
and company address.
Reference
For more information on the item name, refer to "Attribute Name of Custom Items 1, 2, and 3" (P.196).
S/MIME Certificate
Allows you to link an S/MIME certificate. The S/MIME certificate must be registered in
advance.
To link a certificate, select [Attach/Change Link] and select a certificate in a screen
displayed. To remove a link, select [Remove Certificate].
Important
If a certificate linked to an S/MIME certificate in the Address Book is deleted by some reasons such as hard
disk initialization and the deletion of the certificate, the certificate linked to the S/MIME certificate will be
invalid. Even if you re-register the S/MIME certificate, you have to manually link it again.
Note
If many certificates are registered on the machine, it may take a long time to link a certificate.
Note
This feature is available on the ApeosPort series models only.
Reference
For more information on the certificate, refer to "Encryption and Digital Signature Settings" (P.389).

Transfer Protocol

Set the transfer protocol. You can select either [FTP] or [SMB].
Server Name/IP address
Enter a name or an IP address of a forwarding destination server.
Setup
5
275