6
Enter the following information:
Screen prompt
Password
Node
TN
The IP Phone 2002 registers with the Terminal Proxy Server (TPS) and,
if needed, begins the firmware download. This takes several minutes.
When download is complete, the IP Phone 2002 resets.
Note: The Enhanced UNIStim Firmware Download feature for IP Phones
provides an improved method of delivering new firmware to IP Phones.
For further information on Enhanced UNIStim Firmware Download, refer
to IP Line: Description, Installation, and Operation (553-3001-365).
The current Call Server date and time appear on the top line of the display
when the configuration is complete. Self-labeling keys also appear.
7
Check for dial tone and the correct DN above the display.
8
(Optional) Customize the feature keys as required. For more information,
see IP Phone 2002 User Guide.
Nortel IP Phone 2002
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been configured
in your Call Server.
The node ID.
The TN or VTN.
End of Procedure
IP Phones
Description, Installation, and Operation
Page 97 of 600