Nortel 2033 Installation And Operation Manual page 193

LD 11 – Configure the IP Phone KEM. (Part 2 of 5)
Prompt Response
KEY xx aaa yyyy (cccc or D) zz..z
IP Phone Key Expansion Module (KEM)
Description
Telephone function key assignments
The following key assignments determine calling options
and features available to an IP Phone. Note that KEY is
prompted until a carriage return <CR> is entered.
Where:
xx = key number
aaa = key name or function
yyy = additional information required for the key
zz.z = additional information required for the key aaa.
The cccc or D entry deals specifically with the Calling
Line Identification feature, where:
cccc = CLID table entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1.
D = the character "D". When the character "D" is
entered, the system searches the DN keys from key 0
and up, to find a DN key with a CLID table entry. The
CLID associated with the found DN key will then be
used.
Note: The position of the (cccc or D) field varies
depending on the key name or function.
You may enter a CLID table entry if aaa = ACD, HOT d,
HOT L, MCN, MCR, PVN, PVR, SCN, or SCR.
Type xx NUL to remove a key function or feature.
Some data ports require specific key assignments.
Refer to the Meridian Data Services NTPs for
information regarding these requirements.
IP Phones Description, Installation, and Operation
Page 193 of 600