Nortel 2033 Installation And Operation Manual page 317

Replacing an IP Audio Conference Phone 2033
Removing an IP Audio Conference Phone 2033 from
service
Nortel IP Audio Conference Phone 2033
Two IP Phones cannot share the same TN. You must remove the
IP Audio Conference Phone 2033 that is currently using the TN.
Procedure 55
Replacing an IP Audio Conference Phone 2033
1 Obtain the node and TN information of the phone you want to replace.
2 Disconnect the IP Audio Conference Phone 2033 that you want to
replace.
3 Follow Procedure 49 on
Procedure 52 on
Conference Phone 2033.
4 Enter the same TN and Node Number as the IP Audio Conference
Phone 2033 you replaced. The system associates the new IP Audio
Conference Phone 2033 with the existing TN.
Procedure 56
Removing an IP Audio Conference Phone 2033
from service
1 Disconnect the IP Audio Conference Phone 2033 from the network or turn
off the power.
If the IP Audio Conference Phone 2033 was automatically configured, the
DHCP lease expires and the IP address returns to the available pool.
2 In LD 11, enter OUT at the TN prompt.
IMPORTANT!
page 297 and Procedure 50 on
page 314 to install and configure the IP Audio
End of Procedure
End of Procedure
IP Phones Description, Installation, and Operation
Page 317 of 600
page 301 or