Nortel 2033 Installation And Operation Manual page 564

Page 564 of 600
Table 66
[DEVICE_CONFIG] field name definitions
Field name
[DEVICE_CONFIG]
DOWNLOAD_MODE
VERSION
FILENAME
SERVER_IP
Pairing your headset
553-3001-368 Standard 20.00
Appendix G: Bluetooth wireless technology
The [DEVICE_CONFIG] section can point to a single file that enables or
disables the Bluetooth wireless technology on all phones, or it can point to a
device configuration file for specific phones using a wildcard file name to
enable the Bluetooth wireless technology for select phones. The
configuration files for the specific phones use the IP Phone MAC address as
the file name with the .cfg file extension.
Table 66 lists the [DEVICE_CONFIG] section field names and definitions.
Field value
FORCED
or
000001
1140eDEV.cfg
or
*.cfg
xxx.xxx.xxx.xxx
Use Procedure 117 to pair the Bluetooth wireless technology headset with
your IP Phone.
December 2006
Definition
Section header for device configuration file
information
Recommended setting. The version is ignored and
the DEVICE_CONFIG file is always read.
The version of the device config file
Device config filename. The file name can be
anything. If a file name is specified, the file name is
loaded to every IP Phone 1140e.
A wildcard file name enables a different setting to
be configured for every IP Phone. The IP Phone
checks for a file with the MAC address as the file
name (for example, 001365FEF1C6.cfg).
The IP address of the TFTP Server that will
download the FILENAME file.