Nortel 2033 Installation And Operation Manual page 307

Nortel IP Audio Conference Phone 2033
6 (Optional) Customize the soft keys as required. For more information, see
Software Input/Output: Administration (553-3001-311) and IP Audio
Conference Phone 2033 User Guide.
Procedure 51
Installing an IP Audio Conference Phone 2033
for the first time using DHCP
Timing information
When you see the text Nortel, you have 1 s to respond by pressing the
three soft keys at the bottom of the display in sequence from left to right,
one at a time. If you miss the 1-s response time, the IP Audio
Conference Phone 2033 attempts to locate the connect server. You can
begin the power-up sequence again, or you can double-press the
Services key to open the network diagnostic utilities to access the IP
Phone settings. See Appendix E "IP Phone diagnostic utilities" on
page 497.
You will hear a tone shortly before the IP Phone is ready to start the Nortel
IP Phone application. Once the application has loaded and started, you
will see the Nortel logo and Starting DHCP will appear at the bottom of
the screen.
To edit network configuration the following soft keys are available:
• OK—accept current settings and proceed to the next configuration
option. If all configuration options are presented, the configuration is
saved and the IP Phone reboots with the saved changes.
• BkSpace—backspace a configuration entry to change it
• Clear—clear an entire configuration entry
• Cancel—cancels out of network configuration. The IP Phone reboots
without saving changes.
1 At the prompt DHCP Yes/No?, enter 1 (1 for Yes).
.
End of Procedure
IMPORTANT!
IP Phones Description, Installation, and Operation
Page 307 of 600