Nortel 2033 Installation And Operation Manual page 380

Page 380 of 600
Before you begin
First-time installation
553-3001-368 Standard 20.00
Nortel IP Phone 1140E
• Startup sequence
• Installing the IP Phone 1140E
Before installing the IP Phone 1140E, complete the following pre-installation
checklist:
• Ensure there is one IP Phone 1140E boxed package for each
IP Phone 1140E being installed. The package contains:
— IP Phone 1140E
— handset
— handset cord
— 2.3 m (7 ft) CAT5 Ethernet cable
— Number plate and lens
— Getting Started Card
• Ensure the host Call Server is equipped with the Voice Gateway Media
Card, or a Signaling Server with the Line TPS application.
• If an AC power adapter is required, ensure the approved Nortel global
power supply (model # N0089601) is used. Refer to Table 42 on
page 378.
You must first install an IP Telephony Node with the Communication Server.
For information about installing an IP Telephony Node, see Signaling Server:
Installation and Configuration (553-3001-212), or IP Line: Description,
Installation, and Operation (553-3001-365).
CAUTION
Damage to Equipment
Do not plug your IP Phone 1140E into an ISDN
connection. Severe damage can result.
December 2006