Nortel 2033 Installation And Operation Manual page 338

Page 338 of 600
Before you begin
First-time installation
553-3001-368 Standard 20.00
Nortel IP Phone 1120E
• Startup sequence
• Installing the IP Phone 1120E
Before installing the IP Phone 1120E, complete the following pre-installation
checklist:
• Ensure there is one IP Phone 1120E boxed package for each
IP Phone 1120E being installed. The package contains:
— IP Phone 1120E
— handset
— handset cord
— 2.3 m (7 ft) CAT5 Ethernet cable
— Number plate and lens
— Getting Started Card
• Ensure the host Call Server is equipped with the Voice Gateway Media
Card, or a Signaling Server with the Line TPS application.
• If an AC power adapter is required, ensure the approved Nortel global
power supply (model # N0089601) is used. Refer to Table 37 on
page 336
.
You must first install an IP Telephony Node with the Communication Server.
For information about installing an IP Telephony Node, see Signaling Server:
Installation and Configuration (553-3001-212), or IP Line: Description,
Installation, and Operation (553-3001-365).
CAUTION
Damage to Equipment
Do not plug your IP Phone 1120E into an ISDN
connection. Severe damage can result. The
IP Phone 1120E does not support multiple devices
connected through the PC Ethernet port.
December 2006