Nortel 2033 Installation And Operation Manual page 548

Page 548 of 600
553-3001-368 Standard 20.00
Appendix E: IP Phone diagnostic utilities
Figure 85
IP Networks Statistics screen
1. Packets Sent: 1740
2. Packets Received: 1913
3. Incoming Packets Error: 0
4. Outgoing Packets Error: 0
5. Incoming Pkts Discarded: 0
6. Outgoing Pkts Discarded: 0
7. Unknown Protos: 0
8. The last ICMP Type/Code: 1
Reset
5 To reset the NIPort counters to 0, press the Reset soft key.
6 The display counter values are a snapshot and the displayed counter
values will not change while the display is shown. To refresh them as you
view the counter display, press the Refresh soft key.
7 You can press the Return soft key exit the menu to return to the Local
Diagnostics submenu, or you can press the Stop key to close the menu
and return to the telephone display.
5. USB Devices
The USB Devices tool provides information about an Universal Serial Bus
(USB) devices that connect to your IP Phone. The IP Phone automatically
detects USB devices when they are connected to the USB port in the back of
the IP Phone. The IP Phone will enumerate and list any USB device, but only
December 2006
Refresh
End of Procedure
Return