Appendix E: IP Phone diagnostic utilities
Procedure 108
Using the IP Set&DHCP Information tool
1
Press the Services key twice.
2
Press 2 1 on the dialpad to access the IP Set&DHCP Information menu
or use the Up/Down navigation keys to scroll and highlight the IP Set &
DHCP Information option.
3
Press the Select soft key.
You can press the Return soft key to exit the menu and return to Local
Diagnostics submenu.
The tool displays the following information:
•
Configuration
— Network data validated, MAC address stored, DHCP setting
— Voice VLAN status, type of configuration and discovery status
— Primary Server identification, PC Port enabled status
•
Firmware version and Hardware Identification number
•
Telephone Set IP address
•
Network subnet mask
•
Gateway IP address
•
EPROM Server S1 and S2 IP addresses, ports, actions, and number
of retries
•
Voice VLAN priority and VLAN ID
•
DHCP Response String
•
Server information for S01, S02, S03, and S04, including IP
addresses, ports, actions, number of retries, and failover values
•
TFTP Server IP address
Figure 82 on
page 540
shows IP Set & DHCP Information screen.
IP Phones
Description, Installation, and Operation
Page 539 of 600