Nortel 2033 Installation And Operation Manual page 305

Nortel IP Audio Conference Phone 2033
Cfg XAS? (0-No,1-Yes)
EAP Enable? (0-No, 1-Yes)
Cfg PK (0-No, 1-Yes):0
Duplex (0-Auto, 1-Full):0
Note: You are prompted to enter the TFTP Server IP address if you are
using a TFTP Server to download the current firmware. For CS 1000
Release 4.5, accept the default value of 0.0.0.0. For Succession Release
3.0 or CS 1000 Release 4.0, enter the TFTP Server IP address. The
IP Phone searches for the TFTP Server for firmware upgrade. If the file
name specified in configuration file is not the same as the current
2-Au
Enter a VLAN ID automatically. This
prompt exists to support future
implementation of DHCP.
VLANFILTER (0-No, 1-Yes)
Default 0 (for No)
You are not prompted for
VLANFILTER if VLAN is not enabled.
Enter 0 (for No), since External
Application Server is not supported
on the IP Audio Conference Phone
2033.
This prompt exists to support future
implementation of External
Application Server.
Default 0 (for No)
You are not prompted to enter Device
ID and Password if you select 1 for
Yes.
For more information on EAP, refer
to Appendix C "802.1x Port-based
network access control" on
page 493.
Default 0 (for No)
Default 0 (for Auto)
IP Phones Description, Installation, and Operation
Page 305 of 600