27 Use the Up/Down navigation keys to scroll and highlight one of the
following options:
•
No VLAN
•
DHCP—VLAN ID is configured automatically to one of the values
received from the DHCP server
•
LLDP MED—VLAN ID is configured automatically to the value
received from 802.1ab LLDP
•
LLDP VLAN Name—VLAN ID is configured automatically to the
value received from 802.1ab LLDP
•
Manual
Note: If LLDP is disabled, LLDP MED and LLDP VLAN Name modes do
not appear in the list. If DHCP is disabled, DHCP does not appear in the
list.
28 Use the Right navigation key to scroll and highlight VLAN Filter check
box.
If the VLAN Filter is enabled, packets destined for the IP Phone port are
filtered on their MAC address and their VLAN tag. Untagged VLAN
packets and tagged VLAN packets that differ from the Telephony VLAN
ID are prevented from reaching the IP Phone port.
For information about VLAN tagging, Appendix B "802.1Q VLAN
description" on
Note: The VLAN Filter check box will appear dimmed if you select No in
the VoiceVLAN combo box.
29 Use the Right navigation key to scroll and highlight Disable PC Port
check box. Press the Enter key to toggle this item on and off.
30 Use the Right navigation key to scroll and highlight DataVLAN combo
box. Press the Down navigation key to open the list box.
Use the Up/Down navigation keys to scroll and highlight one of the
following options:
•
No VLAN
•
LLDP VLAN Name—VLAN ID is configured automatically to the
value received from 802.1ab LLDP
•
VLAN ID value—manual selection of VLAN ID between 1 and 4094
Note: If LLDP is disabled, LLDP VLAN Name does not appear in the list.
Nortel IP Phone 2007
page
483.
IP Phones
Description, Installation, and Operation
Page 179 of 600