Nortel 2033 Installation And Operation Manual page 440

Page 440 of 600
553-3001-368 Standard 20.00
Nortel IP Phone 1150E
21 Use the Right navigation key to scroll and highlight S2 Action. Press the
Send/Enter key to start the edit mode. Use the dialpad to fill in the
information. Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Media Controller, enter 6 or 1
For more information about Secure Media Controller, see Secure Media
Controller: Implementation Guide (553-3001-225).
22 Use the Right navigation key to scroll and highlight Retry. Press the
Send/Enter key to start the edit mode. Use the dialpad to fill in the
information.
Retry—same as S1
23 Use the Right navigation key to scroll and highlight S2 PK.
S2 PK—the Private key of the alternate Secure Media Controller to which
the IP Phone is connected
24 Press the Send/Enter key to start the edit mode. Use the dialpad to fill in
the information. Set the S2 PK to 6 or 1.
25 Press the Send/Enter key to start the edit mode. Use the dialpad to fill in
the information. You must enter a 16-digit hexadecimal number. The
default is ffffffffffffffff.
26 Use the Right navigation key to scroll and highlight VoiceVLAN combo
box. Press the Send/Enter key. Press the Down navigation key to open
the list box.
27 Use the Up/Down navigation keys to scroll and highlight one of the
following options:
• No VLAN
• DHCP—VLAN ID is configured automatically to one of the values
received from the DHCP server
• LLDP MED—VLAN ID is configured automatically to the value
received from 802.1ab LLDP
• LLDP VLAN Name—VLAN ID is configured automatically to the
value received from 802.1ab LLDP
Note: If LLDP is disabled, LLDP MED and LLDP VLAN Name modes do
not appear in the list. If DHCP is disabled, DHCP does not appear in the
list.
December 2006