Nortel 2033 Installation And Operation Manual page 561

Appendix G: Bluetooth wireless technology
3 The device configuration file (1140eDEV.cfg) enables Bluetooth wireless
technology if ENABLE_BT 1 is present. If ENABLE_BT 0 is present,
Bluetooth wireless technology is disabled. Figure 89 shows an example
of the 1140e.cfg file with the FW and the ENABLE_BT line.
It is also possible to use the 1140e.cfg file with only the
[DEVICE_CONFIG] section for the control of Bluetooth wireless
technology. Figure 90 on
file with only the [DEVICE_CONFIG] section.
Note: If only the [DEVICE_CONFIG] version is used, you must add the
[FW] section before the BootC FW recovery is used. Otherwise, the
BootC FW download fails and the IP Phone reverts to the BootC TPS
download screen.
Figure 89
Sample of the 1140E.cfg file
[FW]
DOWNLOAD_MODE AUTO
VERSION 0625Cxx
FILENAME 0625Cxx.bin
PROTOCOL TFTP
SERVER_IP 192.168.1.100
SECURITY_MODE 0
[DEVICE_CONFIG]
DOWNLOAD_MODE FORCED
VERSION 000001
FILENAME 1140eDEV.cfg
SERVER_IP 192.168.1.100
Figure 90
Sample of the DEVICE_CONFIG file with only the [DEVICE_CONFIG]
section
[DEVICE_CONFIG]
DOWNLOAD_MODE FORCED
VERSION 000001
FILENAME 1140eDEV.cfg
SERVER_IP 192.168.1.100
page 561 shows an example of the 1140e.cfg
IP Phones Description, Installation, and Operation
Page 561 of 600