Nortel 2033 Installation And Operation Manual page 359

Replacing an IP Phone 1120E
Removing an IP Phone 1120E from service
Two IP Phones cannot share the same TN. You must remove the
IP Phone 1120E that is currently using the TN.
Procedure 63
Replacing an IP Phone 1120E
1 Obtain the node and TN information of the phone you want to replace.
2 Disconnect the IP Phone 1120E that you want to replace.
3 Follow Procedure 58 on
IP Phone 1120E.
4 Enter the same TN and Node Number as the IP Phone 1120E you
replaced. The Call Server associates the new IP Phone 1120E with the
existing TN.
Procedure 64
Removing an IP Phone 1120E from service
1 Disconnect the IP Phone 1120E from the network or turn off the power.
Note: The service to the PC is disconnected as well if the PC is
connected to the IP Phone 1120E.
If the IP Phone 1120E was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
2 In LD 11, enter OUT at the TN prompt.
Nortel IP Phone 1120E
IMPORTANT!
page 339 to install and configure the
End of Procedure
End of Procedure
IP Phones Description, Installation, and Operation
Page 359 of 600