Installation And Configuration - Nortel 2033 Installation And Operation Manual

Page 124 of 600
Table 12
IP Phone 2004 component list (Part 2 of 2)
Power transformer (117/120 VAC 50/60 Hz) (North America)
Power transformer 3-prong AC to AC, direct plug-in, 8W, 240 VAC,
50Hz to 16 VAC at 500 mA (Ireland and UK)
Power transformer AC to AC, direct plug-in, 8W, 230 VAC, 50/60
Hz, to 16 VAC at 500 mA (Europe)
Power transformer 2-prong wall plug direct plug-in AC to AC, 8W,
240 VAC, 50 Hz, to 16 VAC at 500 mA (Australia and New Zealand)
Power transformer AC to AC, direct plug-in, 8W, 100 VAC, 50 Hz, to
16 VAC at 500 mA

Installation and configuration

Before you begin
553-3001-368 Standard 20.00
Nortel IP Phone 2004
For more information, and for information about previous versions of the
IP Phone, contact your Nortel representative.
The following sections provide a step-by-step guide through the
IP Phone 2004 installation and configuration process:
• Before you begin
• First-time installation
• Configuring the IP Phone 2004
• Startup sequence
• Installing the IP Phone 2004
Before installing the IP Phone 2004, complete the following pre-installation
checklist:
• Ensure there is one IP Phone 2004 boxed package for each
IP Phone 2004 being installed. The package contains:
— IP Phone 2004
December 2006
A0619627
A0656598
A0619635
A0647042
A0828858