Nortel 2033 Installation And Operation Manual page 167

retries. The S4 string will already be present if the XAS support has been
configured through the DHCP. If XAS is not configured, you can still enable
password protection by setting the S4 IP address to 0.0.0.0 and by setting the
other fields to 0.
With Full DHCP, the vendor-specific or site-specific options must be
configured depending on the customers DHCP server configuration.
For further information on configuring Full DHCP, refer to Converging the
Data Network with VoIP (553-3001-160).
Accessing the Local Tools menu
Once the password is entered, the Local Tools menu remains active for 5
minutes. You can freely navigate, exit and reenter the Local Tools menu
without being prompted to reenter the password. To reset the timer before the
5 minute time expires, double-press the Services key.
You can also press the 5 key to select the Lock Now item from the Lock
Menu. The Lock Now item immediately exits the Local Tools menu, closes
any open Local Tools menu pages, and locks the Local Tools menu.
Alternatively, when time expires, the Local Tools menu and any open
submenus are closed. Double-press the Services key to open the password
prompt window to reaccess the Local Tools menu.
If you enter an incorrect password, the Local Tools menu will not open.
Double-press the Services key to open the password prompt window. Only
three incorrect password entries are allowed. Any entry after the three
attempts is ignored for 5 minutes. The password prompt window is visible
and you can reenter the password but the password is not processed until the
5 minute time expires.
Note: Some text appears dimmed depending on the current state of the
menu lock and the configuration of the IP Phone. Only configuration
options which are enabled from the current state appear active. Menu
options that are not available appear dimmed.
Nortel IP Phone 2007
IMPORTANT!
IP Phones Description, Installation, and Operation
Page 167 of 600