Reinstalling An Ip Phone 1140E - Nortel 2033 Installation And Operation Manual

Page 400 of 600

Reinstalling an IP Phone 1140E

553-3001-368 Standard 20.00
Nortel IP Phone 1140E
You can reinstall an existing previously configured IP Phone 1140E on the
same Call Server. For example, the IP Phone 1140E can be assigned to a new
user (new TN) or to an existing user who moved to a new subnet by changing
the TN of the IP Phone 1140E.
Procedure 69
Changing the TN of an existing
IP Phone 1140E
1 Repower the IP Phone 1140E.
Note: During the reboot sequence of a previously configured IP Phone,
the IP Phone 1140E displays the existing node number for approximately
five seconds.
2 If the node password is enabled and NULL, choose one of the following:
a. Disable the password.
b. Set the password as non-NULL.
3 Press OK when the node number displays.
If
the node password is enabled and
is not NULL
the node password is disabled
4 Enter the password at the password screen, and press OK.
A TN screen displays.
Note: To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager:
System Administration (553-3001-332).
5 Select the Clear soft key to clear the existing TN.
6 Enter the new TN.
December 2006
Then
a password screen displays. Go to
step 4.
a TN screen displays. Go to
step 5.
End of Procedure