Nortel 2033 Installation And Operation Manual page 346

Page 346 of 600
Startup sequence
Table 38
IP Phone 1120E IP parameters
Parameter
VLAN ID
IP Address
Net Mask
Default Gateway Address
Connect Server (IP address, port,
action and retry count—primary and
secondary)
User ID (Node ID, Node Password
and TN)
Installing the IP Phone 1120E
553-3001-368 Standard 20.00
Nortel IP Phone 1120E
When an IP Phone 1120E is connected to the network, it must perform a
startup sequence. The elements of the startup sequence include:
• obtaining VLAN ID (if supported by the network infrastructure)
• obtaining the IP parameters
• connecting to the Call Server
• obtaining a User ID
See Table 38 for a summary of the IP parameters and how they are obtained.I
Method of acquisition
Manually entered or automatically obtained through
DHCP, and LLDP.
Manually entered or automatically obtained through
Partial or Full DHCP.
Manually entered or automatically obtained through
Partial or Full DHCP.
Manually entered or automatically obtained through
Partial or Full DHCP.
Manually entered or automatically obtained through Full
DHCP.
Manually entered for first-time configuration. Obtained
from local storage on subsequent power cycles.
To install the IP Phone 1120E, use Procedure 59, "Configuring the IP Phone
1120E" on page 339.
December 2006