Nortel 2033 Installation And Operation Manual page 537

Appendix E: IP Phone diagnostic utilities
Procedure 107
Using the IPSet&DHCP Information tool
1 Tap the Tools icon.
2 Tap the Local Diagnostics soft key.
3 Tap the IPSet&DHCP Information soft key.
The tool displays the Exit soft key at the bottom of the display and the
following information:
• Configuration
— Network data validated, MAC address stored, DHCP setting
— Voice VLAN status, type of configuration and discovery status
— Primary Server identification
• Firmware version and Hardware Identification number
• Telephone Set IP address
• Network subnet mask
• Gateway IP address
• EPROM Server S1 and S2 IP addresses, ports, actions, and number
of retries
• Voice VLAN priority and VLAN ID
• DHCP Respond String
• Server Information for S01, S02, S03, and S04, including IP
addresses, ports, actions, number of retries, and failover values
4 Use the scroll bar to display all the information.
5 Tap the Exit soft key to return to the Local Diagnostics menu.
End of Procedure
IP Phones Description, Installation, and Operation
Page 537 of 600