Nortel 2033 Installation And Operation Manual page 374

Page 374 of 600
Information line display
Soft key label display
553-3001-368 Standard 20.00
Nortel IP Phone 1140E
Note: If a label is longer than ten characters, the last ten characters are
displayed and the excess characters are deleted from the beginning of the
string.
The IP Phone 1140E has a three-line information display area with the
following information:
• caller number
• caller name
• feature prompt strings
• user-entered digits
• date and time information (if the IP Phone is in an idle state) or Call
Timer (if provisioned in the Telephone options menu)
The information in the display area changes, according to the call processing
state and active features.
The soft key label has a maximum of seven characters. Each soft key includes
the soft key label and an icon. When a soft key is in use, a triangle icon
displays at the beginning of the soft key label, and the label shifts one
character to the right. (If the label is six characters long, the last or rightmost
character is truncated.) If a feature is enabled, the icon state turns to On. It
remains in the on state until the feature key is pressed again. This cancels the
enabled feature and turns the icon off, returning the soft key label to its
original state.
Use the More soft key to navigate through the layers of functions. If there are
only four functions assigned to the soft keys, the More key does not appear
and all four functions are displayed.
December 2006