Nortel 2033 Installation And Operation Manual page 441

For more information about VLAN configuration, refer to Converging the
Data Network with VoIP (553-3001-160).
28 Press the Send/Enter key.
29 Use the Right navigation key to scroll and highlight VLAN Filter check
box. Press the Send/Enter key to toggle this item on and off.
If the VLAN Filter is enabled, packets destined for the IP Phone port are
filtered on their MAC address and their VLAN tag. Untagged VLAN
packets and tagged VLAN packets that differ from the Telephony VLAN
ID are prevented from reaching the IP Phone port.
For information about VLAN tagging, refer to Appendix B "802.1Q VLAN
description" on
Note: The VLAN Filter check box will appear dimmed if you select No in
the VoiceVLAN combo box.
30 Use the Right navigation key to scroll and highlight Disable PC Port
check box. Press the Send/Enter key to toggle this item on and off.
31 Use the Right navigation key to scroll and highlight DataVLAN combo
box. Press the Send/Enter key. Press the Down navigation key to open
the list box.
32 Use the Up/Down navigation keys to scroll and highlight one of the
following options:
• No VLAN
• LLDP VLAN Name—VLAN ID is configured automatically to the
value received in the VLAN NAME TLV
• VLAN ID value—Enter the VLAN ID manually. This is a number
between 1 and 4094.
Note: If LLDP is disabled, LLDP VLAN Name does not appear in the list.
33 Press the Send/Enter key.
34 Use the Right navigation key to scroll and highlight PC-Port Untag All
check box. Press the Send/Enter key to toggle this item on and off.
If DATA VLAN is enabled, the tag on all traffic destined for the PC port is
stripped, by default. To override this action, deselect the PC-Port Untag
All check box. If DATA VLAN is disabled, the tag on all traffic destined for
the PC port is not stripped. To override this action, select the PC-Port
Untag All check box.
Nortel IP Phone 1150E
page 483.
IP Phones Description, Installation, and Operation
Page 441 of 600