Nortel 2033 Installation And Operation Manual page 567

Appendix G: Bluetooth wireless technology
— If the headset timed out and exited search/pairing mode, put the
headset in pairing mode, as discussed in step 4, and repeat
step 8.
— Check that you are using the correct PIN and repeat step 8.
10 Choose one of the following:
• If your headset is displayed as the first item in the Paired combo box,
proceed to step 11.
• If more than one device is paired, you may need to navigate to the
one you want, as follows:
— Press the Right navigation key one or more times to highlight
the item in the Paired combo box. Press the Enter key to start
the edit mode.
— Press the Up/Down navigation keys to open the list. Press the
Up/Down navigations key to scroll in the list and highlight your
headset.
— Press the Enter key to select the headset and close the list.
Press the Enter key to exit edit mode.
11 Choose one of the following:
• If only one headset is paired, proceed to step 12.
• If more than one wireless headset is paired, the first headset paired
is automatically made the active device.
To make a different headset active, press the Right navigation key
one or more times to highlight the Set button (next to the Set Active
Device item). Press the Enter key.
The message Set active: <device name> appears. This means the
headset named is now the active wireless headset and is used when
you press the headset key.
12 Press the Exit soft key to exit to the main display. Changes are saved
automatically.
IP Phones Description, Installation, and Operation
Page 567 of 600