Nortel 2033 Installation And Operation Manual page 508

Page 508 of 600
553-3001-368 Standard 20.00
Appendix E: IP Phone diagnostic utilities
— If the destination IP address is in the list, press the Select soft
key to select the IP address. Press the Select soft key again to
return to the TraceRoute submenu.
— If the destination IP address is not in the list, continue scrolling
through the available IP address list until the IP address 0.0.0.0
appears. Press the Select soft key.
Tip: To edit the IP address, use the Delete soft key and the Cancel
soft key. Use the * key for dots.
4 Press the Select soft key to save the new IP address, or press the Cancel
soft key to return to the TraceRoute submenu.
Procedure 93
Changing the number of Hops
1 From the TraceRoute submenu, use the Navigation keys to scroll to the
Max Nr of Hops submenu item.
2 Press the Select soft key.
Tip: Use the dialpad and the Delete and Clear soft keys to enter the
number of Hops.
3 Do one of the following:
• Press the Select soft key to accept the change and return to the
TraceRoute submenu.
• Press the Cancel soft key to return to the TraceRoute submenu.
Procedure 94
Tracing a route
1 From the TraceRoute submenu, use the Navigation keys to scroll to the
TraceRoute! submenu item.
2 Press the Select soft key. Route tracing starts.
Tip: Press the Stop soft key to stop the trace.
December 2006
End of Procedure
End of Procedure