Page 344 of 600
553-3001-368
Standard 20.00
Nortel IP Phone 1120E
lower screws. When the lower screws are snug, install the phone on
the mounting screws, and then tighten the top screws.
•
Method B: Attach the 15 cm (6 inch) CAT5e cable, position the stand
over the mounting rivets, and slide the phone down the wall so that
the rivets fit into the slots on the stand.
10 Replace the stand cover. Ensure that all cables are neatly routed and
press the stand cover into place until you hear a click.
December 2006