Nortel 2033 Installation And Operation Manual page 506

Page 506 of 600
553-3001-368 Standard 20.00
Appendix E: IP Phone diagnostic utilities
Procedure 88
Entering an IP address
1 Scroll through the Ping submenu to the IP Addr menu item. An IP
address appears if previously entered. Example 47.249.48.20.
2 Press the Select soft key.
3 Use the Navigation keys to scroll to the destination IP address.
— If the destination IP address is in the list, press the Select soft
key to select the IP address. Press the Select soft key again to
return to the Ping submenu.
— If the destination IP address is not in the list, continue scrolling
through the available IP address list until the IP address 0.0.0.0
appears. Press the Select soft key.
Tip: To edit the IP address, use the dialpad and the Delete soft key
and the Cancel soft key. Use the * key for dots.
4 Press the Select soft key to save the new IP address or press the Cancel
soft key to return to the Ping submenu.
Procedure 89
Changing the number of Pings
1 From the Ping submenu, use the Navigation keys to scroll to the Nr of
Pings submenu item.
2 Press the Select soft key.
Tip: Use the Delete and Clear soft keys to enter the number of pings.
3 Do one of the following:
• Press the Select soft key to accept the change and return to the Ping
submenu.
• Press the Cancel soft key to return to the Ping submenu.
December 2006
End of Procedure
End of Procedure