Nortel 2033 Installation And Operation Manual page 76

Page 76 of 600 Nortel IP Phone 2002
Keys and functions
Table 6
IP Phone 2002 keys and functions (Part 1 of 2)
Key
Speaker
User-defined feature
keys (self-labeled)
Message waiting light/
Incoming call indicator
Soft keys (self-labeled)
Navigation keys
Inbox (Message)
Outbox/Shift
Directory
Quit
Expand to PC
553-3001-368 Standard 20.00
Table 6 describes the IP Phone 2002 keys and functions.
Function
Press the In LD 11, enter OUT at the TN prompt. key to activate the
speaker.
User-defined feature keys (self-labeled) are configured for various
features on the IP Phone. One must be the prime DN key.
A steady LCD light beside a line (DN) key indicates the feature or
line is active. A flashing LCD indicates the line is on hold or the
feature is being programmed.
The Message waiting light turns ON to indicate that a message has
been left for the user. This light also flashes when the set ringer is
ON.
Soft keys (self-labeled) are located below the display area. The LCD
label above the key changes, based on the active feature.
Note: A triangle before a key label indicates that the key is active.
Use the navigation keys to scroll through menus and lists in the
display area.
Press the Message (Inbox) key to access your voicemail box.
The Outbox/Shift key is a fixed key that is reserved for future feature
development.
Press the Directory key to access Directory services.
Press the Quit key to end an active application.
Pressing the Quit key does not affect the status of the calls currently
on your IP Phone.
The Expand to PC key is used to access external server
applications such as External Application Server (XAS).
December 2006