Nortel 2033 Installation And Operation Manual page 376

Page 376 of 600
Configuring Secure Local Menu through Full DHCP
Accessing the Local Tools menu
553-3001-368 Standard 20.00
Nortel IP Phone 1140E
– 4. DHCP Secure Menu
– 5. Lock Now
The settings configured in the Lock Menu sub menu override the settings
received from the DHCP string.
For more information about 4. Lock Menu manual user settings, refer to
Appendix F "Configuring the Local Tools menu" on
Password protection is enabled during Full DHCP configuration if the
SECUREMENU parameter, or the PARTSECURE parameter are present at
the end of the S4 part of the Full DHCP string. If neither the SECUREMENU
parameter, nor the PARTSECURE parameter is present, password protection
is not enabled.
The SECUREMENU/PARTSECURE item is an optional parameter. If it is
present, then the full S4 string needs to be present, including the action and
retries. The S4 string will already be present if the XAS support has been
configured through the DHCP. If XAS is not configured, you can still enable
password protection by setting the S4 IP address to 0.0.0.0 and by setting the
other fields to 0.
With Full DHCP, the vendor-specific or site-specific options must be
configured depending on the customers DHCP server configuration.
For further information on configuring Full DHCP, refer to Converging the
Data Network with VoIP (553-3001-160).
Once the password is entered, the Local Tools menu remains active for 5
minutes. You can freely navigate, exit and reenter the Local Tools menu
without being prompted to reenter the password. To reset the timer before the
5 minute time expires, double-press the Services key.
December 2006
IMPORTANT!
page 551.