Figure 41: Installing The M320 Cable Guards - Juniper M320 Hardware Manual

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Place one of the lower cable guards over one of the front-mounting flanges of the
5.
chassis, aligning the cable guard with the standoffs on the flange. Each of the two
captive screws on the guard should be aligned with a corresponding hole in the flange.
Tighten each of the two captive screws partway on the cable guard.
6.
Tighten each of the two captive screws completely.
7.
Repeat Steps 5 through
8.

Figure 41: Installing the M320 Cable Guards

M320 Cable Management System Description on page 12
M320 Installation Safety Guidelines on page 323
M320 Chassis Description on page 7
M320 Cabinet Size and Clearance Requirements on page 88
Chapter 17: Installing the M320 With a Mechanical Lift
7 for the other lower cable guard.
141