Copyright © 2015, Juniper Networks, Inc.
After you remove each PIC, immediately place it on an antistatic mat or in an
10.
electrostatic bag.
If you are not reinstalling a FPC into the emptied FPC slot within a short time, install
11.
a blank FPC panel over the slot to maintain proper airflow in the FPC card cage.
CAUTION:
After removing an FPC from the chassis, wait at least 30
seconds before reinserting it, removing an FPC from a different slot, or
inserting an FPC into a different slot.
Figure 93: Removing an FPC
Chapter 27: Replacing Line Card Components
229