M320 Chassis And Interface Alarm Messages; Table 78: M320 Chassis Alarm Messages - Juniper M320 Hardware Manual

Related
Documentation

M320 Chassis and Interface Alarm Messages

Table 78: M320 Chassis Alarm Messages

Component Alarm Type
Fans Red
Yellow
Temperature sensors Red
Yellow
Power supplies Red
Yellow
Copyright © 2015, Juniper Networks, Inc.
M320 Control Board (CB) LEDs on page 46
PIC LEDs—Each PIC has one or more LEDs that indicates the status of the PIC. For
more information, see the M320 Multiservice Edge Router Interface Module Reference.
Power supply LEDs—One LED on each power supply faceplate indicates the status of
that power supply.
See "M320 Power Supply LEDs" on page
M320 Craft Interface Description on page 15
M320 Chassis and Interface Alarm Messages on page
In both Table 78 on page 285
"LCD Message" appears in the LCD. The text in the column labeled "CLI Message" appears
in the output from the
show chassis alarms
LCD Display Message
Fan Failure
Fans Missing
Fan Removed
Temperature Hot
Sensor Failure
Temperature Warm
PEM pem-number Over Temp
PEM pem-number Output Fail
PEM pem-number Input Fail
PEM pem-number Removed
Chapter 32: Troubleshooting Components
76.
and Table 79 on page 286, the text in the column labeled
command.
CLI Message
fan-name Failure
Too many fans missing or failing
fan-name Removed
Temperature Hot
Temperature sensor failure
Temperature Warm
PEM pem-number Over Temperature
PEM pem-number Output Failure
PEM pem-number Input Failure
PEM pem-number Removed
285.
285