M320 Multiservice Edge Router Hardware Guide
Table 54: Site Preparation Checklist (continued)
Item or Task
Hardware Configuration
Choose the configuration.
Rack
Verify that your rack meets the minimum
requirements for the installation of the router.
Plan rack location, including required space
clearances.
If a rack is used, secure rack to floor and building
structure.
Cables
Acquire cables and connectors:
Determine the number of cables needed
based on your planned configuration.
Review the maximum distance allowed for
each cable. Choose the length of cable based
on the distance between the hardware
components being connected.
Plan the cable routing and management.
Related
Documentation
M320 Router Physical Specifications
Table 55: M320 Physical Specifications
Description
Chassis dimensions
86
For More Information
"M320 Chassis Description" on
page 7
"Rack Requirements for the M320
Router" on page 87
"M320 Clearance Requirements" on
page 91
"Rack Requirements for the M320
Router" on page 87
"Calculating Power Budget and
Power Margin for Fiber-Optic Cables"
on page 112
"Maintaining M320 PICs and PIC
Cables" on page 276
M320 Installation Safety Guidelines on page 323
General Safety Guidelines for Juniper Networks Devices on page 315
Maintenance and Operational Safety Warnings for Juniper Networks Devices on page 335
Table 55 on page 86
summarizes the physical specifications for the router chassis.
Value
34.80 in. (88.4 cm) high
17.43 in. (44.3 cm) wide
25.64 in. (65.1 cm) deep (from front-mounting flange to chassis
rear)
Total depth (including cable management system)
29.85 in. (75.8 cm)
Performed By
Date
Copyright © 2015, Juniper Networks, Inc.