Figure 71: Routing Engine Console Or Auxiliary Cable - Juniper M320 Hardware Manual

M320 Multiservice Edge Router Hardware Guide
Related
Documentation
196
Using a 2.5-mm flat-blade screwdriver, tighten the screws on the connector.
3.
Attach the other end of the cable to the console or auxiliary device.
4.

Figure 71: Routing Engine Console or Auxiliary Cable

HOST
0
ETHERNET
ACT 0
YEL = 10M
GRN = 100M
CONSOLE
AUXILIARY
HOST
1
ETHERNET
ACT 1
YEL = 10M
GRN = 100M
CONSOLE
AUXILIARY
RED ALARM
NC
C
NO
NC
C
NO
YELLOW
ALARM
Connect the other end of the serial cable into the serial port on the console or auxiliary
5.
device.
M320 Connector Interface Panel (CIP) Description on page 13
M320 Routing Engine Interface Cable and Wire Specifications on page 115
Copyright © 2015, Juniper Networks, Inc.