Unpacking The M320; Tools And Parts Required To Unpack The M320 Router; Unpacking The M320 Router - Juniper M320 Hardware Manual

CHAPTER 15

Unpacking the M320

Tools and Parts Required to Unpack the M320 Router

Related
Documentation

Unpacking the M320 Router

Copyright © 2015, Juniper Networks, Inc.
Tools and Parts Required to Unpack the M320 Router on page 123
Unpacking the M320 Router on page 123
Verifying the M320 Router Parts Received on page 125
To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
Unpacking the M320 Router on page 123
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate.
The router chassis is bolted to this pallet. Quick Start installation instructions and a
cardboard accessory box are also included in the shipping crate.
The shipping crate measures 50 in. (127 cm) high, 30 in. (76.2 cm) wide, and 41 in. (104 cm)
deep. The total weight of the crate containing the router and accessories can range from
582 lb (267 kg) to 650 lb (295 kg).
NOTE: The router is maximally protected inside the shipping crate. Do not
unpack it until you are ready to begin installation.
To unpack:
123