Figure 114: Do Not Rest The Fpc On An Edge - Juniper M320 Hardware Manual

M320 Multiservice Edge Router Hardware Guide
274

Figure 114: Do Not Rest the FPC on an Edge

You hold an FPC vertically when installing it into the chassis. To hold an FPC vertically
(see Figure 115 on page 275):
Orient the FPC so that the faceplate faces you.
1.
Place one hand around the FPC faceplate about a quarter of the way down from the
2.
top edge. To avoid deforming the electromagnetic interference (EMI) shielding strip,
do not press hard on it.
Place your other hand at the bottom edge of the FPC. If the FPC has heat sinks about
3.
midway between the faceplate and connector edge, place your other hand against
the heat sinks.
Copyright © 2015, Juniper Networks, Inc.